Acceder a la Debian para WinSCP en la raíz del directorio ir por el camino usr / local / Raptor, si sólo utiliza un álbum vc estará ubicado dentro de la Raptor pegar el archivo cache1 si usted no tiene que u Carpeta sólo encontrará la lista de su caché, si usted tiene la carpeta cache1 abrirla y eliminar todo dentro de ella y ella y su caché del 84% !!

lo que quiero y que el calamar + Raptor hacer peticiones DNS en mi otro servidor que también está paralelos en mi CCR1036, si mi DNS FreeBRs servidor del sitio que con más producción y más relevante todos sabemos que a lo largo proveedor y es bueno tener un servidor DNS propio y que dependerá de Google o de otras personas que hoy en día son muy estables con la demanda de Internet, sobre todo por parte de Google que ya no está aquí, en mis padres a Brasil y obtener depende de DNS dns giga de y el dns a voces que no son hasta el tabaco  :(

http://freebrs.brbyte.com/

Ola, me pregunto si podemos dirigir los dns_nameservers el squid.conf para mis IP local FreeBRs servidor DNS esta paralelas a mi Mikrotik este gran, mucho mejor que el Bind9 instalado en Debian que inclussive desde que discapacitados, cambié en squid.conf poner el modo de google

dns_nameservers localhost 192.168.11.2
dns_nameservers 8.8.8.8 8.8.4.4

y reinicié mi pc rapaz

Vi una actuación monstruo rapaz ofrecer altas tasas de caché, como mi red y GigaLAN opté a mano hay 100 MB, y corregir o tendría que cambiar algo más ??

Éter 13 y hay salida de la puerta de mi lan equilibrio con 12 de 15 mb enlaces ADSL en un RB 1100 AHX2

Foro Amigos, voy a dejar que esta contribución decidí unir dos reglas que se incorporaron a un joemg6 administrador echaré el enlace y las reglas para el equilibrio y el servidor !!

En primer lugar les tiene a mí para buscar las ips de Netflix entrega de ping a él, más me caminado pesqusando al respecto y encontrar que utiliza varios servidores dispersos está así que decidí coger una regla que yo estoy aquí para pasar los reproductores de vídeo como neodriver, gota video, video PW e incluyen Netflix ellos !!


en equilibrio
/ip firewall mangle

add chain=prerouting comment="************************************  Fuera de balance  ************************************" dst-address-list=loopback in-interface=ether13
add action=add-dst-to-address-list address-list=loopback address-list-timeout=3h chain=prerouting comment="Drop  Video" content=dropvideo.com
add action=add-dst-to-address-list address-list=loopback address-list-timeout=3h chain=prerouting comment="Video PW" content=videopw.com
add action=add-dst-to-address-list address-list=loopback address-list-timeout=3h chain=prerouting comment="Neo  Driver" content=neodrive.co
add action=add-dst-to-address-list address-list=loopback address-list-timeout=3h chain=prerouting comment=Netflix content=netflix.com

Los clientes en el servidor
/ip firewall nat

add chain=dstnat comment="Sale del Raptor caché" dst-address-list=no-cache dst-port=80 protocol=tcp

/ip firewall mangle

add action=add-dst-to-address-list address-list=no-cache address-list-timeout=3h chain=prerouting comment="Netflix sin almacenar en caché" content=netflix.com

El balance de las reglas arriba y servidor de hacer una primera exploración y añadir las ips de lista de Netflix para abordar automáticamente en cuenta que he añadido un tiempo de 3 horas en la balanza y servidores clientes también

Polo del enlace

http://www.alterserv.com/foros/index.php?topic=5.0

Espero que ayuda mucho aquí un saludo a todos  :D !!

Llegar a otra ssd hd pero no entienden por qué el disco debian sin montar con los demás, probado en Windows 7 y que era bueno he comprobado con el sintonizador de HD y esta bien más cuando se ponen de vuelta simplemente guardado falta la imagen de arriba y sin embargo, traté bash multicachedir.sh y la pantalla estaba cerrada y no dio a conocer el disco 3 y sin montar, luego trató mkfs -t ext4 /dev/sdd reconoce el formato de disco pero no se ejecuta con el comando bash multicachedir.sh y no correr

No puedo añadir o montar este disco ssd 120gb 4 para el almacenamiento en caché, ya dio el arranque para el debian y ha creado una ext4 y nada aparece montado y los otros 2 discos eran como sistema !!

esto podría ser LVM o y los discos duros ejemplo de unión, por lo que me di cuenta de que aquí, en caso de que haya un HD completa a la próxima que se utilizará para el almacenamiento en caché, ya que el LVM sería todos juntos en un grupo y que ambos trabajen dividiendo esta carga, aquí estoy usando 3 HD SSD de 120 GB 480 mb grabación y ejecución de este gran rapaz de la forma en que se realiza como el tema sin desfase en la red y la entrega rápida de la caché incluso utilizando sólo un disco !!

Puse el DNS de OpenDNS porque aquí el google se ha ido servidores DNS locales, y si se utilizan en este momento está cayendo tampoco ciertos horarios del día por los atascos de tráfico todo debido a nuestra presidenta Dilma que casi condujo google de Brasil !!


[severino@euclides@MikroTik] > ping 8.8.8.8
  SEQ HOST                                     SIZE TTL TIME  STATUS             
    0 8.8.8.8                                    56  56 67ms
    1 8.8.8.8                                    56  56 77ms
    2 8.8.8.8                                    56  56 55ms
    3 8.8.8.8                                    56  56 68ms
    4 8.8.8.8                                    56  56 72ms
    5 8.8.8.8                                    56  56 85ms
    6 8.8.8.8                                    56  56 53ms
    7 8.8.8.8                                                  timeout           
    8 8.8.8.8                                                  timeout           
    9 8.8.8.8                                    56  56 85ms
   10 8.8.8.8                                    56  56 80ms
   11 8.8.8.8                                    56  56 67ms
   12 8.8.8.8                                    56  56 75ms
   13 8.8.8.8                                    56  56 70ms
   14 8.8.8.8                                    56  56 93ms
   15 8.8.8.8                                    56  56 69ms
   16 8.8.8.8                                    56  56 62ms
   17 8.8.8.8                                    56  56 63ms
   18 8.8.8.8                                    56  56 55ms
   19 8.8.8.8                                    56  56 58ms

Lo siento, cometí un error tipográfico en el texto resolv.conf que has publicado y no se dio cuenta que había publicado incorrecto, por favor revise saludos

Servidor DNS Bind9 ya y la actualización actual o tiende a ser actualizados, porque me doy excavación hasta cierto sait en la web y me de un ping de 128 o superior, entonces repito la excavación para ello y entiendo (0) después de un 10 minutos de tiempo le dará a la terminal y cavar de nuevo y obtener de ping de 80 y después de (0), el derecho se mantendrá en la memoria caché y no borrar la caché DNS, algo que se pueda hacer al respecto !! ??

Creo que la caché DNS es muy importante utilizar también !!

en mi mikrotik utilizar, así

1 - 127.0.0.1 - Debian y Bind9
2 - 192.168.12.2 - Debian y Raptor caché
3 - 208.67.222.222 - abierta DNS primario
4 - 208.67.220.220 - DNS secundario abierto

en la ruta del archivo /etc/resolv.conf en su contenido por lo que este

search raptor.os
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
nameserver 208.67.222.222
nameserver 208.67.220.220

En mi squid.conf este modo

dns_nameservers 8.8.8.8 8.8.4.4
dns_nameservers 208.67.222.222 208.67.220.220

Sería algo mal en Bind9 utilizar el local DNS !!

Por mi parte sería grande utilizar una caché DNS local en la misma máquina que se utiliza también, saludos !!!

Realmente problema HD no puede manejar mucho tráfico o 3 megas  >:( , que marca más desvergonzada, donde un 500GB HD ganarla  !!

[    0.376919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.376977] msgmni has been set to 16007
[    0.377107] alg: No test for stdrng (krng)
[    0.377128] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.377131] io scheduler noop registered
[    0.377133] io scheduler deadline registered
[    0.377144] io scheduler cfq registered (default)
[    0.377201] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.377235] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.377290] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.377318] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.377385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.377401] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.377403] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.377626] intel_idle: does not run on family 6 model 23
[    0.377646] ERST: Table is not found!
[    0.377648] GHES: HEST is not enabled!
[    0.377696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.397997] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.464531] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.464734] Linux agpgart interface v0.103
[    0.464892] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.467657] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.467662] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.467761] mousedev: PS/2 mouse device common for all mice
[    0.467799] rtc_cmos 00:03: RTC can wake from S4
[    0.467883] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.467904] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.467914] cpuidle: using governor ladder
[    0.467915] cpuidle: using governor menu
[    0.468064] TCP cubic registered
[    0.468095] NET: Registered protocol family 10
[    0.468450] Mobile IPv6
[    0.468452] NET: Registered protocol family 17
[    0.468455] Registering the dns_resolver key type
[    0.468550] PM: Hibernation image not present or could not be loaded.
[    0.468557] registered taskstats version 1
[    0.469106] rtc_cmos 00:03: setting system clock to 2015-11-14 14:42:13 UTC (1447512133)
[    0.469136] Initializing network drop monitor service
[    0.470159] Freeing unused kernel memory: 580k freed
[    0.470291] Write protecting the kernel read-only data: 6144k
[    0.472239] Freeing unused kernel memory: 644k freed
[    0.474420] Freeing unused kernel memory: 688k freed
[    0.481897] udevd[49]: starting version 175
[    0.494879] usbcore: registered new interface driver usbfs
[    0.494901] usbcore: registered new interface driver hub
[    0.507165] SCSI subsystem initialized
[    0.511032] usbcore: registered new device driver usb
[    0.511596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.511641] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.511644] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.511664] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.511686] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.511695] ehci_hcd 0000:00:1d.7: debug port 1
[    0.515564] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.516894] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeafbc00
[    0.522152] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.522167] 8139cp 0000:03:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    0.522415] 8139too: 8139too Fast Ethernet driver 0.9.28
[    0.523033] 8139too 0000:03:01.0: eth0: RealTek RTL8139 at 0xffffc90000c76c00, f8:1a:67:11:85:bd, IRQ 21
[    0.527239] libata version 3.00 loaded.
[    0.528269] uhci_hcd: USB Universal Host Controller Interface driver
[    0.532018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.532042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.532044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.532046] usb usb1: Product: EHCI Host Controller
[    0.532048] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.532049] usb usb1: SerialNumber: 0000:00:1d.7
[    0.532141] hub 1-0:1.0: USB hub found
[    0.532145] hub 1-0:1.0: 8 ports detected
[    0.532478] ata_piix 0000:00:1f.1: version 2.13
[    0.532519] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.538427] scsi0 : ata_piix
[    0.539840] scsi1 : ata_piix
[    0.540696] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.540698] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.540731] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.540733] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.540742] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.540765] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
[    0.540795] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.540797] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.540799] usb usb2: Product: UHCI Host Controller
[    0.540800] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.540802] usb usb2: SerialNumber: 0000:00:1d.0
[    0.540880] hub 2-0:1.0: USB hub found
[    0.540883] hub 2-0:1.0: 2 ports detected
[    0.540939] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.540942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.540948] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.540977] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
[    0.541002] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.541004] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.541006] usb usb3: Product: UHCI Host Controller
[    0.541007] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.541009] usb usb3: SerialNumber: 0000:00:1d.1
[    0.541079] hub 3-0:1.0: USB hub found
[    0.541082] hub 3-0:1.0: 2 ports detected
[    0.541135] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.541137] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.541142] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.541168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
[    0.541193] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.541195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.541197] usb usb4: Product: UHCI Host Controller
[    0.541198] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.541200] usb usb4: SerialNumber: 0000:00:1d.2
[    0.541271] hub 4-0:1.0: USB hub found
[    0.541274] hub 4-0:1.0: 2 ports detected
[    0.541328] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.541331] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.541336] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.541362] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00
[    0.541387] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.541389] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.541391] usb usb5: Product: UHCI Host Controller
[    0.541392] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[    0.541394] usb usb5: SerialNumber: 0000:00:1d.3
[    0.541467] hub 5-0:1.0: USB hub found
[    0.541470] hub 5-0:1.0: 2 ports detected
[    0.541540] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.541565] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.541804] scsi2 : ata_piix
[    0.541852] scsi3 : ata_piix
[    0.542805] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 22
[    0.542807] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 22
[    0.704258] ata4.01: NODEV after polling detection
[    0.720117] ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
[    0.731712] ata3.00: ATA-8: ST1500DL003-9VT16L, CC32, max UDMA/133
[    0.731715] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.736154] ata4.00: configured for UDMA/100
[    0.744340] ata3.00: configured for UDMA/133
[    0.744456] scsi 2:0:0:0: Direct-Access     ATA      ST1500DL003-9VT1 CC32 PQ: 0 ANSI: 5
[    0.745163] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB01 PQ: 0 ANSI: 5
[    0.748350] sd 2:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    0.748388] sd 2:0:0:0: [sda] Write Protect is off
[    0.748390] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.748406] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.788620]  sda: sda1 sda2 < sda5 >
[    0.788895] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.790179] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    0.790207] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    0.791602] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.791605] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.791713] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.364015] Refined TSC clocksource calibration: 3000.852 MHz.
[    1.364020] Switching to clocksource tsc
[    2.443399] PM: Starting manual resume from disk
[    2.443402] PM: Hibernation image partition 8:5 present
[    2.443403] PM: Looking for hibernation image.
[    2.443757] PM: Image not found (code -22)
[    2.443760] PM: Hibernation image not present or could not be loaded.
[    2.893097] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.893099] EXT4-fs (sda1): write access will be enabled during recovery
[   36.648222] EXT4-fs (sda1): orphan cleanup on readonly fs
[   36.648229] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 36569095
[   36.648250] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 36569094
[   36.648257] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 36569093
[   36.648263] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 36569092
[   36.648269] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 36569091
[   36.648274] EXT4-fs (sda1): 5 orphan inodes deleted
[   36.648276] EXT4-fs (sda1): recovery complete
[   36.714279] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   40.275601] udevd[328]: starting version 175
[   41.330756] input: PC Speaker as /devices/platform/pcspkr/input/input0
[   41.334394] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[   41.334397] ACPI: Power Button [PWRB]
[   41.334434] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   41.334437] ACPI: Power Button [PWRF]
[   41.400993] Error: Driver 'pcspkr' is already registered, aborting...
[   41.658550] ACPI: Requesting acpi_cpufreq
[   41.659631] intel_rng: FWH not detected
[   41.739289] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   41.739311] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   41.796329] iTCO_vendor_support: vendor-support=0
[   41.925431] hda_codec: ALC887-VD: BIOS auto-probing.
[   41.931930] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[   41.939247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   41.939315] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[   41.939410] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   41.945166] leds_ss4200: no LED devices found
[   42.062843] parport_pc 00:06: reported by Plug and Play ACPI
[   42.062942] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   45.061980] Adding 16775164k swap on /dev/sda5.  Priority:-1 extents:1 across:16775164k
[   45.074278] EXT4-fs (sda1): re-mounted. Opts: (null)
[   45.905743] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   46.220791] loop: module loaded
[   46.391800] w83627ehf: Found W83627DHG-P chip at 0x290
[   46.391823] ACPI: resource w83627ehf [io  0x0295-0x0296] conflicts with ACPI region HWRE [io 0x290-0x299]
[   46.391825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   48.108442] 8139too 0000:03:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[   48.884375] RPC: Registered named UNIX socket transport module.
[   48.884378] RPC: Registered udp transport module.
[   48.884379] RPC: Registered tcp transport module.
[   48.884380] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   48.929778] FS-Cache: Loaded
[   49.038638] FS-Cache: Netfs 'nfs' registered for caching
[   49.054995] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   58.312005] eth0: no IPv6 routers present
[   79.515496] ip_tables: (C) 2000-2006 Netfilter Core Team
[   79.768111] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  589.393355] raptor[32511]: segfault at 10 ip 0000000000420833 sp 00007ffcc41b73c0 error 4 in raptor[400000+3d000]
[  688.887639] raptor[6560]: segfault at 10 ip 0000000000420833 sp 00007ffcc41b73c0 error 4 in raptor[400000+3d000]
[  761.391075] raptor[10598]: segfault at 10 ip 0000000000420833 sp 00007ffcc41b73c0 error 4 in raptor[400000+3d000]

Continuando

[    0.164223] pci 0000:03:01.0: PME# supported from D1 D2 D3hot
[    0.164261] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    0.164264] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.164267] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.164271] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.164273] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.164275] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.164277] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.164279] pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[    0.164292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.164389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.164471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.164499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.164534]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.164537]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.164538] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.168598] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 12 14 15)
[    0.168637] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.168674] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15)
[    0.168711] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12 14 15)
[    0.168748] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.168786] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12 14 15)
[    0.168823] ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
[    0.168858] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 12 14 15)
[    0.168924] vgaarb: loaded
[    0.168924] PCI: Using ACPI for IRQ routing
[    0.169188] PCI: pci_cache_line_size set to 64 bytes
[    0.169227] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.169229] reserve RAM buffer: 00000000eff80000 - 00000000efffffff
[    0.169314] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.169317] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.169320] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.176094] Switching to clocksource hpet
[    0.177455] pnp: PnP ACPI init
[    0.177467] ACPI: bus type pnp registered
[    0.177535] pnp 00:00: [bus 00-ff]
[    0.177537] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.177539] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.177541] pnp 00:00: [io  0x0d00-0xffff window]
[    0.177543] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.177544] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.177546] pnp 00:00: [mem 0xf0000000-0xefffffff window disabled]
[    0.177548] pnp 00:00: [mem 0xf4000000-0xffffffff window]
[    0.177581] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.177590] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.177619] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.177621] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.177649] pnp 00:02: [dma 4]
[    0.177650] pnp 00:02: [io  0x0000-0x000f]
[    0.177652] pnp 00:02: [io  0x0081-0x0083]
[    0.177653] pnp 00:02: [io  0x0087]
[    0.177655] pnp 00:02: [io  0x0089-0x008b]
[    0.177658] pnp 00:02: [io  0x008f]
[    0.177660] pnp 00:02: [io  0x00c0-0x00df]
[    0.177681] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.177690] pnp 00:03: [io  0x0070-0x0071]
[    0.177696] pnp 00:03: [irq 8]
[    0.177716] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.177723] pnp 00:04: [io  0x0061]
[    0.177743] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.177752] pnp 00:05: [io  0x00f0-0x00ff]
[    0.177756] pnp 00:05: [irq 13]
[    0.177777] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.178085] pnp 00:06: [irq 7]
[    0.178087] pnp 00:06: [dma 3]
[    0.178088] pnp 00:06: [io  0x0378-0x037f]
[    0.178090] pnp 00:06: [io  0x0778-0x077f]
[    0.178208] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.178233] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.178235] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.178237] pnp 00:07: [io  0x0290-0x0297]
[    0.178269] system 00:07: [io  0x0290-0x0297] has been reserved
[    0.178272] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.178351] pnp 00:08: [io  0x0010-0x001f]
[    0.178354] pnp 00:08: [io  0x0022-0x003f]
[    0.178355] pnp 00:08: [io  0x0044-0x005f]
[    0.178357] pnp 00:08: [io  0x0062-0x0063]
[    0.178358] pnp 00:08: [io  0x0065-0x006f]
[    0.178359] pnp 00:08: [io  0x0072-0x007f]
[    0.178361] pnp 00:08: [io  0x0080]
[    0.178362] pnp 00:08: [io  0x0084-0x0086]
[    0.178364] pnp 00:08: [io  0x0088]
[    0.178365] pnp 00:08: [io  0x008c-0x008e]
[    0.178367] pnp 00:08: [io  0x0090-0x009f]
[    0.178368] pnp 00:08: [io  0x00a2-0x00bf]
[    0.178369] pnp 00:08: [io  0x00e0-0x00ef]
[    0.178371] pnp 00:08: [io  0x0400-0x041f]
[    0.178372] pnp 00:08: [io  0x04d0-0x04d1]
[    0.178374] pnp 00:08: [io  0x0800-0x087f]
[    0.178375] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.178377] pnp 00:08: [io  0x0480-0x04bf]
[    0.178378] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.178380] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[    0.178420] system 00:08: [io  0x0400-0x041f] has been reserved
[    0.178422] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.178424] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.178426] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.178429] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.178431] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.178434] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.178485] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.178508] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.178548] pnp 00:0a: [mem 0xffb00000-0xffbfffff]
[    0.178550] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[    0.178571] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[    0.178604] pnp 00:0b: [mem 0xffc00000-0xffefffff]
[    0.178636] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[    0.178639] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.178851] pnp 00:0c: [irq 4]
[    0.178853] pnp 00:0c: [dma 0 disabled]
[    0.178855] pnp 00:0c: [io  0x03f8-0x03ff]
[    0.178914] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.178996] pnp 00:0d: [io  0x0060]
[    0.178998] pnp 00:0d: [io  0x0064]
[    0.178999] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.179001] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.179035] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.179037] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.179039] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179093] pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
[    0.179127] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.179129] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.179258] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[    0.179260] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[    0.179261] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[    0.179263] pnp 00:0f: [mem 0x00100000-0xefffffff]
[    0.179264] pnp 00:0f: [mem 0xf0000000-0xffffffff]
[    0.179303] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.179305] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[    0.179307] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.179310] system 00:0f: [mem 0x00100000-0xefffffff] could not be reserved
[    0.179312] system 00:0f: [mem 0xf0000000-0xffffffff] could not be reserved
[    0.179314] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.179418] pnp: PnP ACPI: found 16 devices
[    0.179420] ACPI: ACPI bus type pnp unregistered
[    0.185703] PCI: max bus depth: 1 pci_try_num: 2
[    0.185724] pci 0000:00:1c.1: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[    0.185727] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.185730] pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
[    0.185732] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4400000-0xf45fffff]
[    0.185735] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
[    0.185737] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.185739] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.185742] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.185745] pci 0000:00:1c.0:   bridge window [mem 0xf4400000-0xf45fffff]
[    0.185749] pci 0000:00:1c.0:   bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
[    0.185753] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[    0.185755] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.185759] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf41fffff]
[    0.185762] pci 0000:00:1c.1:   bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.185767] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.185769] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.185773] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.185781] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.185791] pci 0000:00:1c.0: setting latency timer to 64
[    0.185795] pci 0000:00:1c.1: enabling device (0104 -> 0107)
[    0.185803] pci 0000:00:1c.1: setting latency timer to 64
[    0.185808] pci 0000:00:1e.0: setting latency timer to 64
[    0.185811] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.185813] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.185814] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.185816] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.185818] pci_bus 0000:00: resource 8 [mem 0xf4000000-0xffffffff]
[    0.185820] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.185821] pci_bus 0000:02: resource 1 [mem 0xf4400000-0xf45fffff]
[    0.185823] pci_bus 0000:02: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
[    0.185825] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.185827] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf41fffff]
[    0.185829] pci_bus 0000:01: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.185831] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.185832] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.185834] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.185836] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.185837] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.185839] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.185841] pci_bus 0000:03: resource 8 [mem 0xf4000000-0xffffffff]
[    0.185879] NET: Registered protocol family 2
[    0.187432] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.188340] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.190897] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.191257] TCP: Hash tables configured (established 524288 bind 65536)
[    0.191259] TCP reno registered
[    0.191271] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.191325] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.191474] NET: Registered protocol family 1
[    0.191625] PCI: CLS 32 bytes, default 64
[    0.191671] Unpacking initramfs...
[    0.362669] Freeing initrd memory: 10000k freed
[    0.365355] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.365360] Placing 64MB software IO TLB between ffff8800ebf7a000 - ffff8800eff7a000
[    0.365361] software IO TLB at phys 0xebf7a000 - 0xeff7a000
[    0.365726] audit: initializing netlink socket (disabled)
[    0.365737] type=2000 audit(1447512132.360:1): initialized
[    0.375902] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.376894] VFS: Disk quotas dquot_6.5.2

Yo estaba en la terminal y apliqué el comando dmesg y me fui de este !!

root@debian:~# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u6
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4cd6f51e-1ff5-4f55-b028-e972919134b4 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000eff80000 (usable)
[    0.000000]  BIOS-e820: 00000000eff80000 - 00000000eff8e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000eff8e000 - 00000000effd0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000effd0000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000210000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/P5P41T-LE, BIOS 0604    01/13/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x210000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000f0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xeff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000eff80000
[    0.000000]  0000000000 - 00efe00000 page 2M
[    0.000000]  00efe00000 - 00eff80000 page 4k
[    0.000000] kernel direct mapping tables up to eff80000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000210000000
[    0.000000]  0100000000 - 0210000000 page 2M
[    0.000000] kernel direct mapping tables up to 210000000 @ eff7a000-eff80000
[    0.000000] RAMDISK: 36c68000 - 3762c000
[    0.000000] ACPI: RSDP 00000000000fb7e0 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000eff80100 00054 (v01 A_M_I_ OEMXSDT  01001113 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000eff80290 000F4 (v03 A_M_I_ OEMFACP  01001113 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000eff80440 07624 (v01  A1433 A1433000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000eff8e000 00040
[    0.000000] ACPI: APIC 00000000eff80390 0006C (v01 A_M_I_ OEMAPIC  01001113 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000eff80400 0003C (v01 A_M_I_ OEMMCFG  01001113 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000eff8e040 00089 (v01 A_M_I_ AMI_OEM  01001113 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000eff87a70 00038 (v01 A_M_I_ OEMHPET  01001113 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000eff8e4e0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000210000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000210000000
[    0.000000]   NODE_DATA [000000020fffb000 - 000000020fffffff]
[    0.000000]  [ffffea0000000000-ffffea00073fffff] PMD -> [ffff880207600000-ffff88020e7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00210000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000eff80
[    0.000000]     0: 0x00100000 -> 0x00210000
[    0.000000] On node 0 totalpages: 2096911
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 964536 pages, LIFO batch:31
[    0.000000]   Normal zone: 15232 pages used for memmap
[    0.000000]   Normal zone: 1098880 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000eff80000 - 00000000eff8e000
[    0.000000] PM: Registered nosave memory: 00000000eff8e000 - 00000000effd0000
[    0.000000] PM: Registered nosave memory: 00000000effd0000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88020fc00000 s78912 r8192 d23488 u524288
[    0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2067338
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4cd6f51e-1ff5-4f55-b028-e972919134b4 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8185868k/8650752k available (3434k kernel code, 263108k absent, 201776k reserved, 3304k data, 580k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3000.342 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.68 BogoMIPS (lpj=12001368)
[    0.004006] pid_max: default: 32768 minimum: 301
[    0.004044] Security Framework initialized
[    0.004048] AppArmor: AppArmor disabled by boot time parameter
[    0.004530] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.009319] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010758] Mount-cache hash table entries: 256
[    0.010868] Initializing cgroup subsys cpuacct
[    0.010872] Initializing cgroup subsys memory
[    0.010882] Initializing cgroup subsys devices
[    0.010884] Initializing cgroup subsys freezer
[    0.010886] Initializing cgroup subsys net_cls
[    0.010887] Initializing cgroup subsys blkio
[    0.010894] Initializing cgroup subsys perf_event
[    0.010920] CPU: Physical Processor ID: 0
[    0.010921] CPU: Processor Core ID: 0
[    0.010923] mce: CPU supports 6 MCE banks
[    0.010930] CPU0: Thermal monitoring enabled (TM2)
[    0.010933] using mwait in idle threads.
[    0.011294] ACPI: Core revision 20110623
[    0.014401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054093] CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 0a
[    0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.056003] ... version:                2
[    0.056003] ... bit width:              40
[    0.056003] ... generic registers:      2
[    0.056003] ... value mask:             000000ffffffffff
[    0.056003] ... max period:             000000007fffffff
[    0.056003] ... fixed-purpose events:   3
[    0.056003] ... event mask:             0000000700000003
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Booting Node   0, Processors  #1
[    0.056003] smpboot cpu 1: start_ip = 9a000
[    0.144033] NMI watchdog enabled, takes one hw-pmu counter.
[    0.144063] Brought up 2 CPUs
[    0.144065] Total of 2 processors activated (12002.35 BogoMIPS).
[    0.146596] devtmpfs: initialized
[    0.149242] PM: Registering ACPI NVS region at eff8e000 (270336 bytes)
[    0.149242] print_constraints: dummy:
[    0.149242] NET: Registered protocol family 16
[    0.149242] ACPI: bus type pci registered
[    0.149242] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.149242] PCI: not using MMCONFIG
[    0.149242] PCI: Using configuration type 1 for base access
[    0.149242] bio: create slab <bio-0> at 0
[    0.149242] ACPI: Added _OSI(Module Device)
[    0.149242] ACPI: Added _OSI(Processor Device)
[    0.149242] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.149242] ACPI: Added _OSI(Processor Aggregator Device)
[    0.149242] ACPI: EC: Look up EC in DSDT
[    0.152104] ACPI: Executed 1 blocks of module-level executable AML code
[    0.154800] ACPI: SSDT 00000000eff8e0d0 00406 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.155018] ACPI: Dynamic OEM Table Load:
[    0.155021] ACPI: SSDT           (null) 00406 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.155261] ACPI: Interpreter enabled
[    0.155266] ACPI: (supports S0 S1 S3 S4 S5)
[    0.155284] ACPI: Using IOAPIC for interrupt routing
[    0.155301] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.156266] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[    0.162917] ACPI: No dock devices found.
[    0.162919] HEST: Table not found.
[    0.162921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.162986] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.163122] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.163124] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.163126] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.163128] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.163130] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff]
[    0.163139] pci 0000:00:00.0: [8086:2e30] type 0 class 0x000600
[    0.163153] DMAR: Forcing write-buffer flush capability
[    0.163155] DMAR: Disabling IOMMU for graphics on this chipset
[    0.163194] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.163206] pci 0000:00:1b.0: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[    0.163259] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.163276] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.163330] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.163348] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.163401] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.163422] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.163453] pci 0000:00:1d.0: reg 20: [io  0xd480-0xd49f]
[    0.163478] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.163509] pci 0000:00:1d.1: reg 20: [io  0xd800-0xd81f]
[    0.163534] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.163565] pci 0000:00:1d.2: reg 20: [io  0xd880-0xd89f]
[    0.163590] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.163621] pci 0000:00:1d.3: reg 20: [io  0xdc00-0xdc1f]
[    0.163653] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.163668] pci 0000:00:1d.7: reg 10: [mem 0xfeafbc00-0xfeafbfff]
[    0.163734] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.163750] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.163799] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.163866] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.163902] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.163912] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.163919] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.163927] pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
[    0.163934] pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
[    0.163941] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.163969] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.163979] pci 0000:00:1f.2: reg 10: [io  0xd400-0xd407]
[    0.163985] pci 0000:00:1f.2: reg 14: [io  0xd080-0xd083]
[    0.163992] pci 0000:00:1f.2: reg 18: [io  0xd000-0xd007]
[    0.163998] pci 0000:00:1f.2: reg 1c: [io  0xcc00-0xcc03]
[    0.164004] pci 0000:00:1f.2: reg 20: [io  0xc880-0xc88f]
[    0.164037] pci 0000:00:1f.2: PME# supported from D3hot
[    0.164075] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.164110] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[    0.164141] pci 0000:03:01.0: [10ec:8139] type 0 class 0x000200
[    0.164155] pci 0000:03:01.0: reg 10: [io  0xe800-0xe8ff]
[    0.164164] pci 0000:03:01.0: reg 14: [mem 0xfebffc00-0xfebffcff]
[    0.164198] pci 0000:03:01.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[    0.164221] pci 0000:03:01.0: supports D1 D2

Mi Raptor esto con el siguiente error y simplemente deja de responder, comenzó después cambié de 500GB HD durante 1,5 terabytes, examinado el disco duro con el fabricante del software y no hay problemas con él, Bads bloques o defectos o advertencias en la pantalla del corazón con el software HD sintonizador, esta perfecta, ¿cuál sería el problema porque ya son 5 paradas !!!

Message from syslogd@debian at Nov 14 11:27:59 ...
kernel:[39177.042845] journal commit I/O error

Message from syslogd@debian at Nov 14 11:27:59 ...
kernel:[39177.042857] journal commit I/O error

bug de Mikrotik 06:32 o ninguna regla, y de todos modos, el cable no se debe a que he examinado tres veces con pruebas y cable nuevo, usado sellados por cable listo y lo mismo, he usado de cable más común el mismo problema, hice una cruz sobre el concierto lan EHA mismo, las tarjetas de red son giga lan, lo que sería !! ??

Una pregunta, ¿qué haría que Quico, y su papel actual !! ??

Amigos les gustaría la opinión de que en un disco duro más grande para el almacenamiento en caché, mi actual y una de 500 GB y que en cuatro días ya cosechado casi 130 GB, para almacenar en caché este nivel ya generado tener una red con más de 300 usuarios y mi máquina caché y con la siguiente configuración !!

Madre Asus 775-P5P41T-le 8 GB DDR3 1333 MHZ otra E8400 procesador de 3.0 1.333 MHz con 6 megas de tarjeta de memoria caché interna !!

la red de uso de la tarjeta PCI X1 puerto dual.

http://mlb-s2-p.mlstatic.com/redes-fio-placas-rede-pci-en-redes-wi-fi-20378-MLB20188055935_102014-Y.jpg

sé que HD pegueno vez más sería interesante saber lo que me pasa HD, ahora en hardware que establecer una buena est o tendría que mejorar !! ??

Hola, en primer lugar agradecer el post con las normas aquí funciona muy bien, yo diría que ella tiene un defecto en el simple cola donde están se resolvería con un google que buscar !!

Script  ( Nome Dei ha regra Raptor )

/queue simple move "Raptor_Cache" destination=0

Schenduler ( correr por el horario que desee )

/system script run Raptor

Tiene que está por encima de todos los otros en la lista para que funcione a la perfección, para los que utilizan Hotspot o quizás PPPoE como autenticación sería interesante que hay un uso, incluso para u configurando # todavía cae en la lista, ya que esto y aburrido busca y está siempre ahí tirando hacia arriba !!
Aquí os dejo un guión de cómo hacerlo a él siempre hace 0 en la lista, ya que el cuerpo tendrá que auterar tiempo allí para su gusto !!!
sería interesante que aguantar a las normas hasta allí con el amigo roxdng, así que no pasará desapercibido, saludos !!