Mostrar Mensajes - Limaforo

#1

Instalación y Configuración RaptorCache / Re:Instalación de RaptorCache 1.0b paralelo a Mikrotik

Febrero 24, 2013, 11:11:52 PM

Que bien, que sigan en el proyecto del caché... exitos gente

#2

Plugins para ThunderCache 3.1.2 / Re:Plugins Dota 2

Diciembre 12, 2012, 12:14:04 AM

Ya se puede jugar dota 2 libremente ? creando un cuenta de cero. O aún requiero invitación y espera ?

#3

Otros / Re:Prioridad en mikrotik

Noviembre 30, 2012, 10:20:49 PM

Tengo esta config, pero estresando en ancho de banda, pareciera que baja el desempeño :

Código [Seleccionar]


/queue treeadd burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=500k name=TotalIN packet-mark=ALL-IN parent=global-in priority=1add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=120k name=TotalOut packet-mark=ALL-OUT parent=global-out priority=1/queue typeset 0 kind=pfifo name=default pfifo-limit=50set 1 kind=pfifo name=ethernet-default pfifo-limit=50set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5add kind=pcq name=pcq-down pcq-burst-rate=0 pcq-burst-threshold=0 pcq-burst-time=10s pcq-classifier=dst-address pcq-dst-address-mask=32 pcq-dst-address6-mask=64 pcq-limit=\    30 pcq-rate=0 pcq-src-address-mask=32 pcq-src-address6-mask=64 pcq-total-limit=2000add kind=pcq name=pcq-up pcq-burst-rate=0 pcq-burst-threshold=0 pcq-burst-time=10s pcq-classifier=src-address pcq-dst-address-mask=32 pcq-dst-address6-mask=64 pcq-limit=25 \    pcq-rate=0 pcq-src-address-mask=32 pcq-src-address6-mask=64 pcq-total-limit=2000set 7 kind=none name=only-hardware-queueset 8 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-defaultset 9 kind=pfifo name=default-small pfifo-limit=10/queue treeadd burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=120k max-limit=500k name=VOIP_IN packet-mark=voip_in parent=TotalIN priority=1 queue=pcq-downadd burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=80k max-limit=120k name=VOIP_OUT packet-mark=voip_out parent=TotalOut priority=1 queue=pcq-upadd burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=500k name=INTERNET_IN packet-mark=internet_in parent=TotalIN priority=2 queue=pcq-downadd burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=120k name=INTERNET_OUT packet-mark=internet_out parent=TotalOut priority=2 queue=pcq-up
/ip firewall mangleadd action=mark-packet chain=postrouting disabled=no dst-address-list=VoIP new-packet-mark=voip_out out-interface=ether1 passthrough=no protocol=udpadd action=mark-packet chain=prerouting disabled=no in-interface=ether1 new-packet-mark=voip_in passthrough=no protocol=udp src-address-list=VoIPadd action=mark-packet chain=postrouting disabled=no new-packet-mark=voip_out out-interface=ether1 packet-size=0-100 passthrough=no protocol=udpadd action=mark-packet chain=prerouting disabled=no in-interface=ether1 new-packet-mark=voip_in packet-size=0-100 passthrough=no protocol=udpadd action=mark-packet chain=postrouting disabled=no new-packet-mark=internet_out out-interface=ether1 passthrough=noadd action=mark-packet chain=prerouting disabled=no in-interface=ether1 new-packet-mark=internet_in passthrough=no

Alguien sabe como hacer pruebas como esta:

http://www.youtube.com/watch?v=AF5AFca-16U

#4

Otros / Re:prioridad en microtik

Noviembre 22, 2012, 03:41:51 PM

Pero si esta http mas mejor prioridad que VoIP, y alguien ve Youtube. No afectaría eso a las llamadas ?