Menú principal
Menú

Mostrar Mensajes

Esta sección te permite ver todos los mensajes escritos por este usuario. Ten en cuenta que sólo puedes ver los mensajes escritos en zonas a las que tienes acceso en este momento.

Menú Mostrar Mensajes

Mensajes - marwill

Páginas1 2
#1
Actualizaciones / Re:[Update] RaptorCache 1.0.5b
Junio 19, 2014, 09:38:26 PM
amigos en un foro de facebook relacionado al raptor la mayoria presenta lentitud... igual yo sera q hace falta una actualizacion?
#2
Instalación y Configuración RaptorCache / Re:problema con clientes
Mayo 25, 2014, 12:16:12 PM
Cita de: firecold en Mayo 25, 2014, 11:10:43 AM
Amigo que DNS estas usando el de Raptor o el de MK, ya que recuerda que si usas el de Raptor se genera mucha latencia y es mucho mas directo si usas el de MK y por ende mas rapido, Saludos
hermanito en el raptor uso los dns de google y en el mk los de mi proovedor
#3
Instalación y Configuración RaptorCache / Re:problema con clientes
Mayo 25, 2014, 12:14:20 PM
Cita de: venezu en Mayo 24, 2014, 09:16:24 PM
usas mikrotik pasame tu id de team puede ser alguna regla que este molestando
hermano desactive todas las reglas y deje solo las del raptor e igual genera lentitud
#4
Instalación y Configuración RaptorCache / problema con clientes
Mayo 24, 2014, 07:48:42 PM
tengo desactivado el raptor ya  q me puso la red lenta, q podra ser? lo activo y me llaman algunos clientes
clientes q esta lento
#5
Instalación y Configuración RaptorCache / Re:ayuda
Mayo 23, 2014, 11:37:29 AM
Cita de: tonyvzla en Mayo 19, 2014, 09:24:35 PM
Te deje el txt alli te lo explique paso a paso
lo hice pero nada el archivo persiste
#6
Instalación y Configuración RaptorCache / Re:ayuda
Mayo 19, 2014, 09:13:47 AM
Cita de: luistec en Mayo 19, 2014, 06:41:49 AM
Eso ocurre porque falta borrar esos registros de la base de datos mysql, para eso ejecutas por terminal los siguientes pasos


Saludos.
hice lo q me dijiste pero el archivo persiste
#7
Instalación y Configuración RaptorCache / ayuda
Mayo 18, 2014, 12:37:39 PM
com hago para borrar el  contenido de redtubefiles.com q pesa 288.52Gb
me meti  por winscp en la carpeta raptor luego ubique la carpeta redtubefiles.com y borre el contenido
pero todavia me aparece
#8
RaptorCache en General / eficacia
Mayo 16, 2014, 03:16:29 PM
mi efecacia en el resumen total estaba en 89% y hoy me bajo a 13 % xq sera?
#9
Squid 2.7 & Squid 3.x / para q?
Abril 25, 2014, 03:48:22 PM
para q estas lineas en el squid conf?
refresh_pattern -i \.swf$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.html$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.htm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtml$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.nub$ 2880 80% 21600 reload-into-ims
refresh_pattern -i \.exe$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.mov$ 86400 80% 43200
refresh_pattern -i \.mpe?g?$ 86400 80% 43200
refresh_pattern -i \.avi$ 86400 80% 43200
refresh_pattern -i \.qtm?$ 86400 80% 43200
refresh_pattern -i \.viv$ 86400 80% 43200
refresh_pattern -i \.wav$ 86400 80% 43200
refresh_pattern -i \.aiff?$ 86400 80% 43200
refresh_pattern -i \.au$ 86400 80% 43200
refresh_pattern -i \.ram?$ 86400 80% 43200
refresh_pattern -i \.snd$ 86400 80% 43200
refresh_pattern -i \.mid$ 86400 80% 43200
refresh_pattern -i \.mp2$ 86400 80% 43200
refresh_pattern -i \.mp3$ 86400 80% 43200
refresh_pattern -i \.sit$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.hqx$ 86400 80% 43200
refresh_pattern -i \.arj$ 86400 80% 43200
refresh_pattern -i \.lzh$ 86400 80% 43200
refresh_pattern -i \.lha$ 86400 80% 43200
refresh_pattern -i \.cab$ 86400 80% 43200
refresh_pattern -i \.rar$ 86400 80% 43200
refresh_pattern -i \.tar$ 86400 80% 43200
refresh_pattern -i \.gz$ 86400 80% 43200
refresh_pattern -i \.z$ 86400 80% 43200
refresh_pattern -i \.a[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.r[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.txt$ 86400 80% 43200
refresh_pattern -i \.pdf$ 86400 80% 43200
refresh_pattern -i \.doc$ 86400 80% 43200
refresh_pattern -i \.rtf$ 86400 80% 43200
refresh_pattern -i \.tex$ 86400 80% 43200
refresh_pattern -i \.latex$ 86400 80% 43200
refresh_pattern -i \.class$ 86400 80% 43200
refresh_pattern -i \.js$ 86400 80% 43200
refresh_pattern -i \.ico$ 86400 80% 43200
refresh_pattern -i \.css$ 10 20% 4320
#10
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 25, 2014, 11:02:48 AM
Cita de: firecold en Abril 25, 2014, 10:52:31 AM
Mandame un MP con tus datos y lo areglaremos, Saludos
listo ta t los envie
#11
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 25, 2014, 11:00:53 AM
cual de los dos squid conf usar:
1-#========================== Squid 3.x Conf ===========================#
#
# Opciones de SQUID 3.x
#----------------------------------------------------------------------
http_port 3128 intercept
visible_hostname proxy.os.com
icp_port 0
#----------------------------------------------------------------------
#error_directory /usr/share/squid3/errors/Spanish/
#----------------------------------------------------------------------
acl denegados url_regex -i "/etc/squid3/denegados.lst"
#----------------------------------------------------------------------
# Servidor DNS y Politica de Cambios
#----------------------------------------------------------------------
dns_nameservers 8.8.8.8 8.8.4.4
dns_retransmit_interval 5 seconds
dns_timeout 2 minutes
#----------------------------------------------------------------------
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl CONNECT method CONNECT

acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl SSL_ports port 443
acl Safe_ports port 443         # https
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl Safe_ports port 631         # cups
acl Safe_ports port 873         # rsync
acl Safe_ports port 901         # SWAT
acl Safe_ports port 1863        # MSN
#acl SSL_ports port 443          # https
acl SSL_ports port 563          # snews
acl SSL_ports port 873          # rsync

http_access allow manager localhost
http_access deny manager all
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost
http_access deny denegados
#----------------------------------------------------------------------
coredump_dir /var/spool/squid3
#----------------------------------------------------------------------
# Memoria reservada para cache
#----------------------------------------------------------------------
cache_mem 512 MB
#----------------------------------------------------------------------
# Maximo tamaño de archivo en cache de memoria
#----------------------------------------------------------------------
maximum_object_size_in_memory 128 KB
#----------------------------------------------------------------------
# Maximo y minimo tamaño de archivos cache en el Disco duro
#----------------------------------------------------------------------
maximum_object_size 800 MB
minimum_object_size 4 KB
#----------------------------------------------------------------------
# Sustituir archivos de cache cuando llegue a 96%
#----------------------------------------------------------------------
cache_swap_low 92
cache_swap_high 96
#----------------------------------------------------------------------
# Total de espacio en HD a ser usado por el cache, numero de carpetas,
# numero de subcarpetas en cache
# 295000 = 295 GB
#----------------------------------------------------------------------
cache_dir aufs /var/spool/squid3/cache1 100000  16 256
#----------------------------------------------------------------------
# Estandar de actualización de cache
# 1 mes = 10080 mins, 1 dia = 1440 mins
#----------------------------------------------------------------------
refresh_pattern -i .(gif|png|jp?g|ico|bmp|tiff?)$ 14400 80% 43200 reload-into-ims
refresh_pattern -i .(swf|htm|html|shtm|shtml|nub)$ 14400 80% 43200 reload-into-ims
refresh_pattern -i .(rpm|cab|deb|exe|msi|msu|zip|tar|xz|bz|bz2|lzma|gz|tgz|rar|bin|7z|doc?|xls?|ppt?|pdf|nth|psd|sis)$ 14400 80% 43200
refresh_pattern -i .(avi|iso|wav|mid|mp?|mpe?g?|mpeg|mov|3gp|wm?|flv|x-flv|axd)$ 14400 80% 43200
refresh_pattern -i .(qtm?|viv|au|ram?|snd|sit|hqx|arj|lzh|lha|txt|rtf|tex|latex|class|js|ico)$ 14400 80% 43200
refresh_pattern -i \.a[0-9][0-9]$ 14400 80% 43200
refresh_pattern -i \.r[0-9][0-9]$ 14400 80% 43200
refresh_pattern -i \.css$ 10 20% 4320
#----------------------------------------------------------------------
refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
#refresh_pattern (Release|Package(.gz)*)$       0       20%     2880
refresh_pattern .               0       20%     4320
#----------------------------------------------------------------------
# Log de acessos por el cache o para SARG
#----------------------------------------------------------------------
logfile_rotate 7
access_log /var/log/squid3/access.log
access_log /var/log/squid3/error.log
cache_store_log none
#----------------------------------------------------------------------
# Otras configuraciones
#----------------------------------------------------------------------
half_closed_clients off
server_persistent_connections off
client_persistent_connections off
log_fqdn off
quick_abort_min 0 KB
quick_abort_max 0 KB
quick_abort_pct 95
max_filedescriptors 65536
cache_effective_user proxy
cache_effective_group proxy
#----------------------------------------------------------------------
# Manteniendo objetos recientes y pequeños en memoria
#----------------------------------------------------------------------
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
#----------------------------------------------------------------------
# Sitios que se les niega el cache  
#----------------------------------------------------------------------
acl nocache dstdomain .4shared.com .youtube.com .windowsupdate.com .gl$
no_cache deny nocache
#----------------------------------------------------------------------
# Deny cache                              
#----------------------------------------------------------------------
acl dontrewrite url_regex (get_video\?|videoplayback\?|videodownload\?|\.flv?)
acl dontrewrite url_regex (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?)
acl dontrewrite url_regex (get_video|videoplayback\?id|videoplayback.*id).*begin\=[1-9][0-9]*
acl dontrewrite url_regex \.(php|asp|aspx|jsp|cgi|js)\?
acl dontrewrite url_regex threadless.*\.jpg\?r=
acl dontrewrite url_regex -i .(asx|asf)$
cache deny dontrewrite
#----------------------------------------------------------------------
acl raptor_lst url_regex -i "/etc/raptor/raptor.lst"
cache deny raptor_lst
cache_peer 192.168.10.2 parent 8080 0 proxy-only no-digest
dead_peer_timeout 2 seconds
cache_peer_access 192.168.10.2 allow raptor_lst
cache_peer_access 192.168.10.2 deny all
#----------------------------------------------------------------------
# Qos_Flows
# -----------------------------------------------------------------------------
qos_flows local-hit=0x30
qos_flows parent-hit=0x32
qos_flows disable-preserve-miss
#----------------------------------------------------------------------



2-#
# Opciones de SQUID 3.x
#----------------------------------------------------------------------
http_port 3128 intercept
visible_hostname proxy.os.com
icp_port 0
#----------------------------------------------------------------------
#error_directory /usr/share/squid3/errors/Spanish/
#----------------------------------------------------------------------
acl denegados url_regex -i "/etc/squid3/denegados.lst"
acl adblock url_regex "/etc/squid3/adblock.acl"
#----------------------------------------------------------------------
# Servidor DNS y Politica de Cambios
#----------------------------------------------------------------------
dns_nameservers 127.0.0.1 8.8.8.8
dns_retransmit_interval 5 seconds
dns_timeout 2 minutes
#----------------------------------------------------------------------
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl CONNECT method CONNECT

acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl SSL_ports port 443
acl Safe_ports port 443         # https
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl Safe_ports port 631         # cups
acl Safe_ports port 873         # rsync
acl Safe_ports port 901         # SWAT
acl Safe_ports port 1863        # MSN
#acl SSL_ports port 443          # https
acl SSL_ports port 563          # snews
acl SSL_ports port 873          # rsync

http_access allow manager localhost
http_access deny manager all
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access deny adblock
http_access allow localhost
http_access deny denegados
#----------------------------------------------------------------------
coredump_dir /var/spool/squid3
#----------------------------------------------------------------------
# Memoria reservada para cache
# Se recomienda que dedique aprox. 5MB de RAM por cada 1GB asignado a cache_dir
#----------------------------------------------------------------------
cache_mem 512 MB
#----------------------------------------------------------------------
# Maximo tamaño de archivo en cache de memoria
#----------------------------------------------------------------------
maximum_object_size_in_memory 128 KB
#----------------------------------------------------------------------
# Maximo y minimo tamaño de archivos cache en el Disco duro
#----------------------------------------------------------------------
maximum_object_size 800 MB
minimum_object_size 4 KB
#----------------------------------------------------------------------
# Sustituir archivos de cache cuando llegue a 96%
#----------------------------------------------------------------------
cache_swap_low 92
cache_swap_high 96
#----------------------------------------------------------------------
# Total de espacio en HD a ser usado por el cache, numero de carpetas,
# numero de subcarpetas en cache
# 295000 = 295 GB
#----------------------------------------------------------------------
cache_dir aufs /var/spool/squid3/cache1 100000  16 256
#----------------------------------------------------------------------
# Estandar de actualización de cache
# 1 mes = 10080 mins, 1 dia = 1440 mins
#----------------------------------------------------------------------
refresh_pattern -i \.jpg$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.gif$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.png$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.jpeg$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.bmp$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.tif$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.tiff$ 86400 80% 43200 reload-into-ims

refresh_pattern -i \.swf$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.html$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.htm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtml$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.nub$ 2880 80% 21600 reload-into-ims
refresh_pattern -i \.exe$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.mov$ 86400 80% 43200
refresh_pattern -i \.mpe?g?$ 86400 80% 43200
refresh_pattern -i \.avi$ 86400 80% 43200
refresh_pattern -i \.qtm?$ 86400 80% 43200
refresh_pattern -i \.viv$ 86400 80% 43200
refresh_pattern -i \.wav$ 86400 80% 43200
refresh_pattern -i \.aiff?$ 86400 80% 43200
refresh_pattern -i \.au$ 86400 80% 43200
refresh_pattern -i \.ram?$ 86400 80% 43200
refresh_pattern -i \.snd$ 86400 80% 43200
refresh_pattern -i \.mid$ 86400 80% 43200
refresh_pattern -i \.mp2$ 86400 80% 43200
refresh_pattern -i \.mp3$ 86400 80% 43200
refresh_pattern -i \.sit$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.hqx$ 86400 80% 43200
refresh_pattern -i \.arj$ 86400 80% 43200
refresh_pattern -i \.lzh$ 86400 80% 43200
refresh_pattern -i \.lha$ 86400 80% 43200
refresh_pattern -i \.cab$ 86400 80% 43200
refresh_pattern -i \.rar$ 86400 80% 43200
refresh_pattern -i \.tar$ 86400 80% 43200
refresh_pattern -i \.gz$ 86400 80% 43200
refresh_pattern -i \.z$ 86400 80% 43200
refresh_pattern -i \.a[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.r[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.txt$ 86400 80% 43200
refresh_pattern -i \.pdf$ 86400 80% 43200
refresh_pattern -i \.doc$ 86400 80% 43200
refresh_pattern -i \.rtf$ 86400 80% 43200
refresh_pattern -i \.tex$ 86400 80% 43200
refresh_pattern -i \.latex$ 86400 80% 43200
refresh_pattern -i \.class$ 86400 80% 43200
refresh_pattern -i \.js$ 86400 80% 43200
refresh_pattern -i \.ico$ 86400 80% 43200
refresh_pattern -i \.css$ 10 20% 4320
#----------------------------------------------------------------------
refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
#refresh_pattern (Release|Package(.gz)*)$       0       20%     2880
refresh_pattern .               0       20%     4320
#----------------------------------------------------------------------
# Log de acessos por el cache o para SARG
#----------------------------------------------------------------------
logfile_rotate 7
access_log /var/log/squid3/access.log
access_log /var/log/squid3/error.log
cache_store_log none
#----------------------------------------------------------------------
# Otras configuraciones
#----------------------------------------------------------------------
half_closed_clients off
server_persistent_connections off
client_persistent_connections off
log_fqdn off
quick_abort_min 0 KB
quick_abort_max 0 KB
quick_abort_pct 95
max_filedescriptors 65536
cache_effective_user proxy
cache_effective_group proxy
#----------------------------------------------------------------------
# Manteniendo objetos recientes y pequeños en memoria
#----------------------------------------------------------------------
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
#----------------------------------------------------------------------
# Sitios que se les niega el cache  
#----------------------------------------------------------------------
acl nocache dstdomain .4shared.com .youtube.com .windowsupdate.com .gl$
no_cache deny nocache
#----------------------------------------------------------------------
# Negar cache para archivos con extension .asx e .asf |streaming|
#----------------------------------------------------------------------
acl asx url_regex -i \.asx$
cache deny asx
acl asf url_regex -i \.asf$
cache deny asf
#----------------------------------------------------------------------
acl raptor_lst url_regex -i "/etc/raptor/raptor.lst"
cache deny raptor_lst
cache_peer 192.168.10.2 parent 8080 0 proxy-only no-digest
dead_peer_timeout 2 seconds
cache_peer_access 192.168.10.2 allow raptor_lst
cache_peer_access 192.168.10.2 deny all
# -----------------------------------------------------------------------------
# Qos_Flows
# -----------------------------------------------------------------------------
qos_flows local-hit=0x30
qos_flows parent-hit=0x32
qos_flows disable-preserve-miss
#----------------------------------------------------------------------
#12
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 25, 2014, 10:38:40 AM
Cita de: firecold en Abril 24, 2014, 06:19:24 PM
Si en todo caso el script es el que te da problemas, puedes volver a copiarlo en el post principal o en cristiano el primero del tema en cuestion, ya lo modifique para ver si lo que creo es el problema, Saludos
no e podido mi hermano
#13
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 23, 2014, 11:21:41 PM
Cita de: firecold en Abril 23, 2014, 11:04:08 PM
En esta parte:

Código [Seleccionar]
http_access allow manager localhost
http_access deny manager all
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost !adblock
http_access deny denegados adblock

La dejas asi:

Código [Seleccionar]
http_access allow manager localhost
http_access deny manager all
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access deny adblock
http_access allow localhost
http_access deny denegados

La guardas y reinicias squid3 con:

Código (bash) [Seleccionar]
service squid3 restart

Saludos
te envie al privado
#14
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 23, 2014, 11:17:10 PM
bendecido te envie al privado
#15
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 23, 2014, 10:58:38 PM
Cita de: firecold en Abril 23, 2014, 10:48:30 PM
Si quieres puedes crear el archivo y despues  ejecutar el script, para crear el archivo lo puedes hacer con:

Código (bash) [Seleccionar]
touch /etc/squid3/adblock.acl

Saludos
ya lo hice mira mi raptor conf coloq este q tu publicast

#
# Opciones de SQUID 3.x
#----------------------------------------------------------------------
http_port 3128 intercept
visible_hostname proxy.os.com
icp_port 0
#----------------------------------------------------------------------
#error_directory /usr/share/squid3/errors/Spanish/
#----------------------------------------------------------------------
acl denegados url_regex -i "/etc/squid3/denegados.lst"
acl adblock url_regex "/etc/squid3/adblock.acl"
#----------------------------------------------------------------------
# Servidor DNS y Politica de Cambios
#----------------------------------------------------------------------
dns_nameservers 127.0.0.1 8.8.8.8
dns_retransmit_interval 5 seconds
dns_timeout 2 minutes
#----------------------------------------------------------------------
acl manager proto cache_object
acl localhost src 127.0.0.1/32 ::1
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1
acl CONNECT method CONNECT

acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl SSL_ports port 443
acl Safe_ports port 443         # https
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl Safe_ports port 631         # cups
acl Safe_ports port 873         # rsync
acl Safe_ports port 901         # SWAT
acl Safe_ports port 1863        # MSN
#acl SSL_ports port 443          # https
acl SSL_ports port 563          # snews
acl SSL_ports port 873          # rsync

http_access allow manager localhost
http_access deny manager all
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access allow localhost !adblock
http_access deny denegados adblock
#----------------------------------------------------------------------
coredump_dir /var/spool/squid3
#----------------------------------------------------------------------
# Memoria reservada para cache
# Se recomienda que dedique aprox. 5MB de RAM por cada 1GB asignado a cache_dir
#----------------------------------------------------------------------
cache_mem 512 MB
#----------------------------------------------------------------------
# Maximo tamaño de archivo en cache de memoria
#----------------------------------------------------------------------
maximum_object_size_in_memory 128 KB
#----------------------------------------------------------------------
# Maximo y minimo tamaño de archivos cache en el Disco duro
#----------------------------------------------------------------------
maximum_object_size 800 MB
minimum_object_size 4 KB
#----------------------------------------------------------------------
# Sustituir archivos de cache cuando llegue a 96%
#----------------------------------------------------------------------
cache_swap_low 92
cache_swap_high 96
#----------------------------------------------------------------------
# Total de espacio en HD a ser usado por el cache, numero de carpetas,
# numero de subcarpetas en cache
# 320000 = 100 GB
#----------------------------------------------------------------------
cache_dir aufs /var/spool/squid3/cache1 100000  16 256
#----------------------------------------------------------------------
# Estandar de actualización de cache
# 1 mes = 10080 mins, 1 dia = 1440 mins
#----------------------------------------------------------------------
refresh_pattern -i \.jpg$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.gif$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.png$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.jpeg$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.bmp$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.tif$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.tiff$ 86400 80% 43200 reload-into-ims

refresh_pattern -i \.swf$ 86400 80% 43200 reload-into-ims
refresh_pattern -i \.html$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.htm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtml$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.shtm$ 10 20% 4320 reload-into-ims
refresh_pattern -i \.nub$ 2880 80% 21600 reload-into-ims
refresh_pattern -i \.exe$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.mov$ 86400 80% 43200
refresh_pattern -i \.mpe?g?$ 86400 80% 43200
refresh_pattern -i \.avi$ 86400 80% 43200
refresh_pattern -i \.qtm?$ 86400 80% 43200
refresh_pattern -i \.viv$ 86400 80% 43200
refresh_pattern -i \.wav$ 86400 80% 43200
refresh_pattern -i \.aiff?$ 86400 80% 43200
refresh_pattern -i \.au$ 86400 80% 43200
refresh_pattern -i \.ram?$ 86400 80% 43200
refresh_pattern -i \.snd$ 86400 80% 43200
refresh_pattern -i \.mid$ 86400 80% 43200
refresh_pattern -i \.mp2$ 86400 80% 43200
refresh_pattern -i \.mp3$ 86400 80% 43200
refresh_pattern -i \.sit$ 86400 80% 43200
refresh_pattern -i \.zip$ 86400 80% 43200
refresh_pattern -i \.hqx$ 86400 80% 43200
refresh_pattern -i \.arj$ 86400 80% 43200
refresh_pattern -i \.lzh$ 86400 80% 43200
refresh_pattern -i \.lha$ 86400 80% 43200
refresh_pattern -i \.cab$ 86400 80% 43200
refresh_pattern -i \.rar$ 86400 80% 43200
refresh_pattern -i \.tar$ 86400 80% 43200
refresh_pattern -i \.gz$ 86400 80% 43200
refresh_pattern -i \.z$ 86400 80% 43200
refresh_pattern -i \.a[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.r[0-9][0-9]$ 86400 80% 43200
refresh_pattern -i \.txt$ 86400 80% 43200
refresh_pattern -i \.pdf$ 86400 80% 43200
refresh_pattern -i \.doc$ 86400 80% 43200
refresh_pattern -i \.rtf$ 86400 80% 43200
refresh_pattern -i \.tex$ 86400 80% 43200
refresh_pattern -i \.latex$ 86400 80% 43200
refresh_pattern -i \.class$ 86400 80% 43200
refresh_pattern -i \.js$ 86400 80% 43200
refresh_pattern -i \.ico$ 86400 80% 43200
refresh_pattern -i \.css$ 10 20% 4320
#----------------------------------------------------------------------
refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
#refresh_pattern (Release|Package(.gz)*)$       0       20%     2880
refresh_pattern .               0       20%     4320
#----------------------------------------------------------------------
# Log de acessos por el cache o para SARG
#----------------------------------------------------------------------
logfile_rotate 7
access_log /var/log/squid3/access.log
access_log /var/log/squid3/error.log
cache_store_log none
#----------------------------------------------------------------------
# Otras configuraciones
#----------------------------------------------------------------------
half_closed_clients off
server_persistent_connections off
client_persistent_connections off
log_fqdn off
quick_abort_min 0 KB
quick_abort_max 0 KB
quick_abort_pct 95
max_filedescriptors 65536
cache_effective_user proxy
cache_effective_group proxy
#----------------------------------------------------------------------
# Manteniendo objetos recientes y pequeños en memoria
#----------------------------------------------------------------------
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
#----------------------------------------------------------------------
# Sitios que se les niega el cache 
#----------------------------------------------------------------------
acl nocache dstdomain .4shared.com .youtube.com .windowsupdate.com .gl$
no_cache deny nocache
#----------------------------------------------------------------------
# Negar cache para archivos con extension .asx e .asf |streaming|
#----------------------------------------------------------------------
acl asx url_regex -i \.asx$
cache deny asx
acl asf url_regex -i \.asf$
cache deny asf
#----------------------------------------------------------------------
acl raptor_lst url_regex -i "/etc/raptor/raptor.lst"
cache deny raptor_lst
cache_peer 192.168.10.2 parent 8080 0 proxy-only no-digest
dead_peer_timeout 2 seconds
cache_peer_access 192.168.10.2 allow raptor_lst
cache_peer_access 192.168.10.2 deny all
# -----------------------------------------------------------------------------
# Qos_Flows
# -----------------------------------------------------------------------------
qos_flows local-hit=0x30
qos_flows parent-hit=0x32
qos_flows disable-preserve-miss
#----------------------------------------------------------------------
#16
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 23, 2014, 10:43:59 PM
Cita de: firecold en Abril 23, 2014, 06:24:57 PM
Dime amigo cual es tu problema, me imagino que el problema es en la configuracion de squid.conf, saludos
hermano hice todo como lo indicas pero no me aparece adblock.acl,  en esta direccion /etc/squid3/adblock.acl, saludos
#17
Squid 2.7 & Squid 3.x / Re:Squid3 y Adblock para Bloqueo de Publicidad
Abril 23, 2014, 02:53:37 PM
hermano me le hechas un ojo?
  133 896 212
5504
#18
Squid 2.7 & Squid 3.x / Re:demostracion de que Squid si puede hacer cache HTTPS, alguna opinion
Abril 21, 2014, 11:21:05 PM
waoooooooooooooooooo
#19
Mangle & Queues / reglas pa rb 750gl
Abril 21, 2014, 02:15:02 PM
estaba usando estas reglas  pero las desactive porq no me dejan trabajar bien el raptor no entrega a velocidad hit cuando las tengo activa ( solo deje activa las d redirrecion)
Código (mk) [Seleccionar]

/ip firewall mangle
add action=mark-routing chain=prerouting comment=\
   "Redireccion raptor________________________________" disabled=no dst-port=\
   80 in-interface="BRIDGE LOCAL" new-routing-mark=raptor_route passthrough=\
   yes protocol=tcp
add action=mark-connection chain=forward comment="== RAPTORCACHE ==" content=\
   "X-Cache: HIT from Raptor" disabled=no new-connection-mark=\
   raptor-connection passthrough=yes
add action=mark-packet chain=forward connection-mark=raptor-connection \
   disabled=no new-packet-mark=raptor-packs passthrough=no
add action=mark-connection chain=forward comment="==SQUID - TOS 12==" disabled=\
   no dscp=12 new-connection-mark=squid-connection passthrough=yes
add action=mark-packet chain=forward connection-mark=squid-connection disabled=\
   no new-packet-mark=squid-packs passthrough=yes
add action=mark-connection chain=prerouting comment="MARCO PRIO 1" disabled=yes \
   new-connection-mark="PRIO 1" passthrough=yes protocol=icmp
add action=mark-packet chain=prerouting connection-mark="PRIO 1" disabled=yes \
   new-packet-mark="PRIO 1" passthrough=yes
add action=mark-connection chain=output disabled=yes dst-port=53 \
   new-connection-mark="PRIO 1" passthrough=yes protocol=udp
add action=mark-connection chain=prerouting disabled=yes dst-port=53 \
   new-connection-mark="PRIO 1" passthrough=yes protocol=udp
add action=jump chain=prerouting disabled=yes jump-target="TERMINO DE PROCESAR" \
   packet-mark="PRIO 1"
add action=mark-connection chain=prerouting comment=\
   "MARCO PRIO 2 , STREAMING - JUEGOS,VOIP" disabled=yes dst-port=5060-5061 \
   new-connection-mark="PRIO 2" passthrough=yes protocol=tcp
add action=mark-connection chain=prerouting disabled=yes dst-address-list=GB \
   new-connection-mark="PRIO 2" passthrough=yes
add action=mark-connection chain=prerouting disabled=yes dst-address-list=\
   Youtube new-connection-mark="PRIO 2" passthrough=yes
add action=mark-connection chain=prerouting disabled=yes dst-port=1863,5190,777 \
   new-connection-mark="PRIO 2" passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 2" disabled=yes \
   new-packet-mark="PRIO 2" passthrough=yes
add action=jump chain=prerouting disabled=yes jump-target="TERMINO DE PROCESAR" \
   packet-mark="PRIO 2"
add action=mark-connection chain=prerouting comment="marco prio 3 navegacion" \
   disabled=yes dst-port=80,443,8000-9000 new-connection-mark="PRIO 3" \
   passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 3" disabled=yes \
   new-packet-mark="PRIO 3" passthrough=yes
add action=jump chain=prerouting disabled=yes jump-target="TERMINO DE PROCESAR" \
   packet-mark="PRIO 3"
add action=mark-connection chain=prerouting comment=\
   "PRIO 4 - PUERTOS LABORALES" disabled=yes dst-port=\
   25,110,143,3389,1723,21-23 new-connection-mark="PRIO 4" passthrough=yes \
   protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 4" dis
   new-packet-mark="PRIO 4" passthrough=yes
add action=jump chain=prerouting disabled=yes jump-target="TERMINO D
   packet-mark="PRIO 4"
add action=mark-connection chain=prerouting comment="MARCO PRIO 5" d
   new-connection-mark="PRIO 5" passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 5" dis
   new-packet-mark="PRIO 5" passthrough=yes
add action=mark-connection chain=prerouting comment="PRIO - 7 MULTID
   connection-bytes=50000000-0 disabled=yes new-connection-mark="PR
   passthrough=yes protocol=tcp
add action=mark-packet chain=prerouting connection-mark="PRIO 7" dis
   new-packet-mark="PRIO 7" passthrough=yes
add action=jump chain=prerouting disabled=yes jump-target="TERMINO D
   packet-mark="PRIO 7"
add action=mark-connection chain=prerouting comment=P2P disabled=yes
   new-connection-mark="PRIO 8" p2p=all-p2p passthrough=yes
add action=mark-packet chain=prerouting connection-mark="PRIO 8" dis
   new-packet-mark="PRIO 8" passthrough=yes
add action=jump chain=prerouting disabled=yes jump-target="TERMINO D
   packet-mark="PRIO 8"
add action=accept chain="TERMINO DE PROCESAR" disabled=yes


/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=0 max-limit=0 name=UPLOAD packet-mark="" parent=WAN priority=1
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=0 max-limit=0 name=DOWNLOAD packet-mark="" parent="BRIDGE LOCAL" priority=1
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=87k max-limit=256k name="UP-PRIO 1" packet-mark="PRIO 1" parent=UPLOAD priority=1 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=87k max-limit=256k name="UP-PRIO 2" packet-mark="PRIO 2" parent=UPLOAD priority=2 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=4M max-limit=100M name="UP-PRIO 3" packet-mark="PRIO 3" parent=UPLOAD priority=3 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=87k max-limit=256k name="UP-PRIO 4" packet-mark="PRIO 4" parent=UPLOAD priority=4 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=87k max-limit=768k name="UP-PRIO 5" packet-mark="PRIO 5" parent=UPLOAD priority=5 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=320k max-limit=1500k name="UP-PRIO 7" packet-mark="PRIO 7" parent=UPLOAD priority=7 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=87k max-limit=256k name="UP-PRIO 8" packet-mark="PRIO 8" parent=UPLOAD priority=8 queue=SUBIDA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=100k max-limit=2M name="PRIO 1" packet-mark="PRIO 1" parent=DOWNLOAD priority=1 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=400k max-limit=2M name="PRIO 2" packet-mark="PRIO 2" parent=DOWNLOAD priority=2 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=2M max-limit=100M name="PRIO 3" packet-mark="PRIO 3" parent=DOWNLOAD priority=3 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=200k max-limit=2M name="PRIO 4" packet-mark="PRIO 4" parent=DOWNLOAD priority=4 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=100k max-limit=2M name="PRIO 5" packet-mark="PRIO 5" parent=DOWNLOAD priority=5 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=320k max-limit=1500k name="PRIO 7" packet-mark="PRIO 7" parent=DOWNLOAD priority=7 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=yes limit-at=1k max-limit=1M name="PRIO 8" packet-mark="PRIO 8" parent=DOWNLOAD priority=8 queue=BAJADA
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name=.RaptorCache packet-mark=raptor-packs parent=global-out priority=4 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=0 name=".Squid 3.x" packet-mark=squid-packs parent=global-out priority=4 queue=default
#20
Actualizaciones / Re:Actualización RaptorWebPanel-001
Abril 15, 2014, 07:45:44 PM
hoy me ananecio la wed panel lenta me tarda para cargar los graficos me abre y qda igual cargando
Páginas1 2