Hola gabriel. Que es precisamente tu problema. Es la regla que tienes en "nat" o hay algo mas.
Te muestro mis reglas y veamos si de esa forma te ayudo. Te cuento que con estas reglas me van de maravilla.
Te muestro mis reglas y veamos si de esa forma te ayudo. Te cuento que con estas reglas me van de maravilla.
Código (mk) [Seleccionar]
/ip firewall filter
add action=accept chain=forward comment="Acepta RaptorCache" disabled=no src-address=192.168.10.0/24
/ip firewall nat
add action=dst-nat chain=dstnat comment="Redirect Raptorcache" disabled=no dst-port=80 protocol=tcp src-address=!192.168.10.254 to-addresses=192.168.10.254 to-ports=3128
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.10.2 routing-mark=raptor_route scope=30 target-scope=10
/ip firewall mangle
add action=mark-routing chain=prerouting comment="Raptor - Mangle ====================>" disabled=no dst-port=80 in-interface=ether2 new-routing-mark=raptor_route passthrough=no protocol=tcp
add action=mark-connection chain=forward comment="== RAPTORCACHE ==" content="X-Cache: HIT from Raptor" disabled=no new-connection-mark=raptor-connection passthrough=yes
add action=mark-packet chain=forward connection-mark=raptor-connection disabled=no new-packet-mark=raptor-packs passthrough=no
add action=mark-connection chain=forward comment="==SQUID - TOS 12==" disabled=no dscp=12 new-connection-mark=squid-connection passthrough=yes
add action=mark-packet chain=forward connection-mark=squid-connection disabled=no new-packet-mark=squid-packs passthrough=yes
/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=4M name="RaptorCache" packet-mark=raptor-packs parent=global-out priority=4 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0 max-limit=4M name="Squid 3.x" packet-mark=squid-packs parent=global-out priority=4 queue=default