RaptorCaching without client browser configuration

[fares201040]

HI, I am new for using raptorcache, actually I cannot speak Portugal or Spanish  language. 
I installed debian 8 and raptor2.b8 and connect it with mikrotik server via eth0, raptor server 192.168.10.2 and mikrotik port connect is 192.168.10.1
I configured the mikrotik by nat, as on http://www.raptorcache.org/instalacion
Also configured the iptables rules (raptor rules) as following:
Localhost – iptables  -A Input –i lo –j ACCEPT
Input LAN- iptables  -A Input –s 172.16.0.0/16  –j ACCEPT
Redirect 3128- iptables –t nat –A PREROUTING –i eth0 –p tcp –dport 80 –j REDIRECT –to-port 3128
Also my local network range not exceed the range 172.16.0.0/16 divided as VLAN.
172.16.101.0/24 with auto dhcp to hotspot
172.16.102.0/24 with auto dhcp to hotspot
172.16.102.0/24 with auto dhcp to hotspot

The problem is that when I do the above configuration the internet not working in client device and show access denied page for client also when I configure the browser proxy for client by putting 192.168.10.2 and port 3128 also internet not working but when I configure the browser proxy by putting 192.168.10.2 and port 8080 internet working and caching work well. Also when I activate mikrotik proxy and put parent proxy 192.168.10.2 and port 8080 and redirect all traffic to mikrotik proxy then internet working but very slow.
I do not want to use mikrotik proxy I want to use the above configuration but without doing any configuration in client browser.

I spent alot of time to solve it but no way, can you please assist me to solve this problem, may you can also write in your language I will translate.

[monfi]

hi, buddy
i think that cache application, doesn't work very well, currently. I was reading in some parts of this forum, and somebodies are recomending don't be installed because it isn't work well with https protocol, listen me , it's  my apreciation "time is golden don't wasting it ",

[fares201040]

I solved the problem, I put nine mangle rule for nine networks and declared those lans in squid.conf.

Regarding the https, actually i search in many forums for a solution but all of choices says to install the certificate on each client device. My friend if you have better choice/application to caching https without installing the certificate on client device please guide me.

Thank you.